The contractor shall perform the following Coding and CSU testing
5.5.1 Software development management. No additional requirements.
5.5.2 Software engineering.
126.96.36.199 The contractor shall develop test procedures for conducting each CSU test. The contractor shall record these procedures in the corresponding CSU software development files (SDFs).
188.8.131.52 The contractor shall code and test each CSU ensuring that the algorithms and logic employed by each CSU are correct and that the CSU satisfies its specified requirements. The contractor shall record the test results of all CSU testing in the corresponding CSU SDFs.
184.108.40.206 The contractor shall make all necessary revisions to the design documentation and code, perform all necessary retesting, and shall update the SDFs of all CSUs that undergo design or coding changes based on CSU tests.
220.127.116.11 The contractor shall develop test procedures for conducting each CSC test. The contractor shall record these procedures in the CSC SDFs.
5.5.3 Formal qualification testing. No additional requirements.
5.5.4 Software product evaluations. The contractor shall perform evaluations of the products identified below, using the evaluation criteria specified in the associated graph.
a. The source code for each CSU
b. The CSC test procedures
c. The CSU test procedures and test results
d. A specified percentage of the set of updated
software development tiles (SDFs).
5.5.5 Configuration management.
18.104.22.168 The contractor shall incorporate the updated Software Design Documents (SDDs) and source code listings for each successfully tested and evaluated CSU into the appropriate Developmental Configuration.
22.214.171.124 The contractor shall place the source code for
each successfully tested and evaluated CSU under configuration control.