2.3  Non-Government publications.  The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of documents are those cited in the solicitation or contract.

AIR TRANSPORT ASSOCIATION OF AMERICA

ATA SPEC 2000 Chapter 9 – Automated Identification and Data Capture

(Copies are available from Air Transport Association of America, Inc., Distribution Center, PO Box 511, Annapolis Junction, MD 20701, or http://www.airlines.org)

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

ASME Y14.24	-	Types and Applications of Engineering Drawings (DoD adopted)
ASME Y14.100	-	Engineering Drawing Practices

(Copies are available from ASME Information Central Orders/Inquiries, P.O. Box 2300, Fairfield, NJ 07007-2300 or www.asme.org)

AUTOMOTIVE INDUSTRY ACTION GROUP

AIAG B-4 Parts Identification and Tracking Application Standard

(Copies of this document are available from Automotive Industry Action Group, Dept 77839, P.O. Box 77000, Detroit, MI 48277-0839, or http://www.aiag.org/)

EAN INTERNATIONAL.UNIFORM CODE COUNCIL

EAN.UCC General EAN.UCC Specifications

(Copies of this document are available from Uniform Code Council, 7887 Washington Village Dr., Dayton, OH 45459-8605, or http://www.uc-council.org/)

ELECTRONIC INDUSTRIES ALLIANCE

EIA 649	National Consensus Standard for Configuration Management
EIA 706	Component Marking Standard
EIA 802	Product Marking Standard

(Copies of these documents are available from Electronic Industries Alliance (EIA), 2500 Wilson Blvd., Arlington, VA 22201, http://www.eia.org/)

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION / INTERNATIONAL ELECTROTECHNICAL COMMISSION

ISO/IEC 15415		Bar Code Print Quality Test Specification – Two-dimensional symbols ISO/IEC 15416 Bar Code Print Quality Test Specification - Linear symbols
ISO/IEC 15417		Bar Code Symbology Specification - Code 128
ISO/IEC 15418		EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance
ISO/IEC 15426-1		Bar Code Verifier Conformance Specification – Part I: Linear
ISO/IEC 15434		Transfer Syntax for High Capacity ADC Media
ISO/IEC 16022		Information Technology – International Symbology Specification – Data Matrix
ISO/IEC 16388		Bar Code Symbology Specification - Code 39

(Copies of these documents are available from American National Standards Institute (ANSI), 25 West 43^rd Street, 4^th floor, New York, NY 10036, or http://webstore.ansi.org/ansidocstore/)

SAE INTERNATIONAL

SAE AS9132          Data Matrix (2d) Coding Quality Requirements for Parts Marking

(Copies of this documents are available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001 or http://www.sae.org/servlets/index)