The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of the documents
which are DOD adopted are those listed in the issue of the DODISS cited in the
solicitation. Unless otherwise specified, the issues of documents not listed
in the DODISS are the issues of the documents cited in the
AMERICAN CONFERENCE OF GOVERNMENT AND INDUSTRIAL
ISBN 0-936-712-39-2 Threshold Limit Values (TLVs) for
Chemical Substances and Physical Agents in the Work Environment. (Application
for copies can be obtained through any commercial bookstore.)
NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C95.1 Safety levels with respect
to human exposure to radio frequency electromagnetic fields, 300 Hz to 100
ANSI C95.2 Radio frequency radiation hazard warning symbol.
C95.3 Techniques and Instrumentation for the Measurement of Potentially
Hazardous Electromagnetic Radiation at Microwave Frequencies.
Safety Color Code for Marking Physical Hazards.
ANSI N2.1 American
National Standard for Warning symbols- Radiation symbol.
ANSI X3.131 Small
Computer System Interface (SCSI)
ANSI X3T9.5 Fiber Distribution Data
Interface (FDDI) Station Management (SMT). (Applications for copies should be
addressed to the American National Standards Institute, 1430 Broadway, New
York, NY 10018.)
AMERICAN SOCIETY OF HEATING AND AIR CONDITIONING
ASHRAE Handbook HVAC Systems and Applications.
(Application for copies should be addressed to the American Society of Heating
and Air Conditioning Engineers, 1791 Tullie Circle, NE, Atlanta, GA
AMERICAN SOCIETY FOR TESTING AND MATERIALS
ASTM A 153
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel
ASTM A 4944 Standard Specification for Castings, Nickel and
ASTM B 16 Rod, Bar and Shapes for Use in Screw Machines, Free
ASTM B 21 Rod, Naval Brass, Bar and Shapes (Metric).
B 26 Aluminum-alloy Sand Castings.
ASTM B 36 Brass Plate & Sheet, Strip
and Rolled Bar.
ASTM B 121 Plate, Leaded Brass, Sheet, Strip and Rolled
ASTM B 122 Plate, Sheet, Strip, and Rolled Bar, Copper Nickel Tin
Alloy, Copper Nickel Zinc Alloy, (Nickel Silver) and Copper Nickel Alloy.
ASTM B 124 Copper and Copper Alloy Forging Rod Bar and Shapes.
138 Manganese Bronze Rod, Bar and Shapes.
ASTM B 139 Phosphor Bronze Rod,
bar, and Shapes, General Specification for.
ASTM B 151 Rod and Bar,
Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire.
ASTM B 194 Copper-Beryllium Alloy Plate, Sheet, Strip and Rolled Bar.
ASTM B 196 Copper-Beryllium Alloy Rod and Bar.
ASTM B 197
Copper-Beryllium Alloy Wire.
ASTM B 206 Copper-Nickel-Zinc Alloy (Nickel
& Silver) Wire and Copper-Nickel Alloy Wire.
ASTM B 545 Standard
Specification for Electrodeposited Coatings of Tin.
ASTM B 633 Standard
Specification for Electrodeposited Coatings of Zinc on Iron and Steel. (DOD
ASTM D 1868 Standard Method for Detection and Measurement of
Partial Discharge (Corona) Pulses in Evaluation of Insulation System.
D 3951 Standard Practices for Commercial Packing.
ASTM D 4169 Performance
Testing of Shipping Containers and Systems, Practice of.
ASTM F 104
Standard Classification System for Nonmetallic Gasket Materials.
1166 Standard Practices for Human Engineering Design for Marine Systems,
Equipment and Facilities. (Application for copies should be addressed to the
American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA
ELECTRONIC INDUSTRIES ASSOCIATION (RIA)
Between Terminal Equipment and Data Circuit-Terminating Equipment Employing
Serial Binary Data Interchange. RS-310 Racks, Panels, and Associated
Equipment. (DOD Adopted)
RS-422 Electrical Characteristics of Balanced
Voltage Digital Interface Circuit. (Application for copies should be addressed
to the Electronic Industries Association, 2001 Pennsylvania Avenue, NW,
Washington, DC 20006.)
THE INSTITUTE FOR INTERCONNECTING AND PACKAGING
ELECTRONIC CIRCUITS (IPC)
D-330 CIU Documents. (Application for copies
should be addressed to the Institute for Interconnecting and Packaging
Electronic Circuits, 7380 N. Lincoln Avenue, Lincolnwood, IL
INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)
Basic Environmental Testing Procedures, Part 2: Tests, Test Ka: Salt
68-2-13 Basic Environmental Testing Procedures, Part 2: Tests, Test
M: Low Air Pressure.
68-2-30Db Basic Environmental Testing Procedures, Part
2: Tests, Test Db and Guidance: Damp Heat, Cyclic (12 + 12 hour cycle)
68-2-3CA Basic Environmental Testing Procedures, Part 2: Tests, Test Ca:
Damp Heat, Steady State.
(Application for copies should be addressed to
the American National Standards Institute, 1430 Broadway, New York, NY
INSTITUTE OF ELECTRICAL AND ELECTRONIC ENGINEERS (IEEE)
100 IEEE Standard Dictionary of Electrical and Electronic Terms.
Reference Designations for Electrical and Electronics Parts and Equipments
(ANSI Y32.16, DOD adopted).
IEEE 260 IEEE Standard Letter Symbols for
Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other
IEEE 268 Standard Metric Practice (DOD adopted).
Standard Letter Symbols for Quantities Used in Electrical Science and
Electrical Engineering (DOD adopted).
IEEE 315 Graphic Symbols for
Electrical and Electronics Diagrams (Including Reference Designation Class
Designation Letters)(ANSI Y32.2)
IEEE 315A Supplement to Graphic Symbols
for Electrical and Electronics Diagrams (DOD adopted).
IEEE 488.1 IEEE
Standard Digital Interface for Programmable Instrumentation.
IEEE 696 IEEE
Standard 696 Interface Devices
IEEE 802.3 Information Processing Systems -
Local Area Networks - Part 3: Carrier Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and Physical Layer Specification.
802.5 Token Ring Access Method and Physical Layer Specifications.
896.1 IEEE Standard Backplane Bus Specification for Multiprocessor
cIEEE 961 Standard for an 8-Bit Microcomputer Bus
System: STD Bus
IEEE 1014 Standard for a Versatile Backplane Bus: VMEbus
IEEE 1196 Standard for a Simple 32-Bit Backplane Bus: NuBus
Standard for a High-Performance Synchronous 32-Bit Bus: MULTIBUS II
(Applications for copies should be addressed to the Institute of Electrical
and Electronics Engineers Inc, 345 East 47th Street, New York, NY
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70 National
Electrical Code (NEC) (Application for copies should be addressed to the
National Fire Protection Association, One Batterymarch Park, P.O. Box 9101,
Quincy, MA 02269-9101.)
UNDERWRITERS LABORATORIES, INC.
Information-Processing and Business Equipment.
UL-1012 Power Supplies.
(Applications for copies should be addressed to the Underwriters Laboratories,
Inc,. 333 Pfingsten Road, Northbrook, IL 60062.)