E.1.1 Scope. This Appendix establishes uniform requirements for the
preparation of the DD Form 1694,
"Request for Deviation/Waiver ." This Appendix is a mandatory part of the
standard. The information contained herein is intended for compliance.
E.1.2 Application. The provisions of this Appendix apply whenever DD Form
1694 is utilized to request a deviation or a waiver.
E.2 APPLICABLE DOCUMENTS
This section is not applicable to this Appendix.
E.3.1 Definitions used in this Appendix. For purposes of this Appendix, the
definitions contained in Section 3 of
this standard shall apply.
E.4 GENERAL REQUIREMENTS
E.4.1 Use of DD Form
1694 . The contractor shall prepare and submit DD Form 1694, Figure 10, or
an authorized alternative, to request deviations or waivers. Local
reproduction of DD Form 1694 is authorized.
E.4.2 Request for deviation. The contractor shall request a deviation when,
prior to manufacture, it is necessary to depart temporarily from the
applicable approved configuration documentation for a specific quantity of
deliverable units. Normally, for the unit(s) affected, the different
configuration will be permanent. (See
E.4.3 Request for waiver. The contractor shall request a waiver when,
during or after manufacture, the contractor desires authorization to deliver
nonconforming items to the Government which do not comply with the applicable
technical requirements. For the unit(s) affected, the different configuration
will normally be permanent. (See