F.1.1 Scope. This Appendix establishes uniform requirements for preparing
the DD Form
1696, "Specification Change Notice". This Appendix is a mandatory part of
the standard. The information contained herein is intended for
F.1.2 Application. The DD Form 1696
shall provide the information required by this Appendix. DD Form 1696 is
the required form to be used for processing an SCN unless a contractor format
has been authorized by the Government. The SCN should only state the exact
change proposed to the specification.
F.2 APPLICABLE DOCUMENTS
This section is not applicable to this Appendix.
F.3.1 Definitions used in this Appendix. For purposes of this Appendix, the
definitions contained in Section 3 of
this standard shall apply.
F.4 GENERAL REQUIREMENTS
F.4.1 Application. Paragraph
5.4.6 identifies situations under which an SCN is required. Local
reproduction of DD Form 1696 is authorized.
F.4.2 Preparation of DD Form
1696 . DD Form 1696, Figure 11, shall provide the information required in
this Appendix, and shall include detailed change information as required by
5.4.6. Any data which cannot be included in the block spaces allotted on the
form shall be included in attachments referenced in the block.
F.4.3 Pages affected by this SCN and previously changed pages. The columnar
sections of DD Form 1696, Block 16 (upper half), and Block 17 (lower half),
have been divided to clarify entries.