Andreasen, M. S. Kahler, and T. Lund - Design for Assembly, IFS
Publications, Ltd. 1983.
Bancroft, C.E. - Design for Manufacturability - Half Speed Ahead,
Manufacturing Engineering, Vol. 101, No. 3, p. 67-69,1988.
Bancroft, C.E. - Overlooked Aspects of Design for Manufacturability, IEEE
Circuits Devices, Vol. 4, No. 6, p. 15-10, November, 1988.
Barker, P.A. - Design for Manufacturability, Printed Circuit Design, Vol.
Boltz, R.W. - Production Processes - The Producibility Handbook, Conquest
Publications, 1977, Winston-Salem, North Carolina.
Boothroyd, G. and P. Dewhurst - Product Design Key to Successful Robotic
Assembly - Part 1 and 2, Assembly Engineering, p. 90-93, August, p. 28-31,
Boothroyd, G. and P. Dewhurst - Product Design for Assembly, Boothroyd
Dewhurst, Inc. 212 Main Street, Wakefield, Rhode Island, 1987.
Bralla, J.G. ed. - Handbook of Product Design for Manufacturing,
McGraw-Hill Book Company, 1986.
Brown, J.O. - Producibility Problem Solving or the Supplier Quality Paradox
- A Fix?, Annual Quality Congress Transactions Publication, ASQC, Milwaukee,
Wisconsin, p. 696-701,1987.
Bunselmeyer, K. - Manufacturability Checklist for Printed Wiring
Assemblies, Printed Circuit Design Vol.4,No.6,p.23-4,1987.
Byrne, D.M. and S. Taguchi - Taguchi Approach to Parameter Design, Quality
Progress, Vol. 20, No. 12, p.29-26,1987.
Cooke, et al - A Guide to Design for Production, Institution of Production
Corser, T. and A. Seirey - Optimizing a Design for Production, Inspection,
and Operation, Computers in Mechanical Engineering, September, p. 18-27,
Department of Defense - Military Handbook: Design Guidance for
Producibility, MIL-HDBK-727, -- Department of Defense, April, 1984.
Department of Defense - Military Standard: Manufacturing Management
Program, MIL-STD-1528A, Department of Defense, September, 1986.
Department of Defense - Transition from Development to Production, DoD
4245.7-M, September, 1985.
Department of the Navy - Best Practices: How to Avoid Surprises in the
World's Most Complicated Technical Process, NAVSO P-6071, Washington, DC,
L Dewhurst, P. and B. Boothroyd - Early Cost Estimating in Product Design,
Journal of Manufacturing Systems, Vol. 7, No. 3, p. 183-191, 1988.
Dwivedi, S.N. and K.R. Barry - Design for Manufacturability Makes Dollars
and Sense, CIM Review, Vol. 2, No. 3, p. 53-59,1986.
Evans, B. - Simultaneous Engineering, Mechanical Engineering, Vol. 110, No.
Frazier, I.M. - Computer Assisted Manufacturability Rating of Printed
Wiring Board Assemblies, Proceedings - Fall Industrial Engineering Conference,
Institute of Industrial Engineers. Norcross, Georgia, p. 204-208,
Garrola, A. - Design Analysis for Automatic Assembly, Proceedings of 8th
International Conference on Production Research. Springer-Verlog,
Gatenby, D.A. - Design for 'X' (DFX and CAE/CAD), Proceedings of the 3rd
International Conference on Product Design for Manufacture and Assembly, p.12.
George, R. - Designing for Manufacturability, High Performance Systems -
the Magazine for Technology Champions, Vol. 10, No. 1, p. 2, 1989.
Hawiszczak, R. - Integrating Producibility Tools into a CAE Design
Environment, Proceedings for the 3rd International Conference on Product
Design for Manufacture and Assembly, p. 15, 1988.
Heidenreich, P. - Designing for Manufacturability, Quality Progress, Vol.
21, No. 5, p. 41-44, May, 1988.
Howe, R.E. Ed. - Producibility/Machinability of Space-Age and Conventional
Materials, American Society of Tool and Manufacturing Engineers, Dearborn,
Kackar, R.N. and A.C. Shoemaker - Robust Design: A Cost-Effective Method
for Improving Manufacturing Processes, AT&T Technical Journal Vol. 65, No.
p. 39-50, March-April, 1986.
London, P. B. Hankins, M. Sapossnek and S. Luby The Cost and
Manufacturability, Expert: A Customizable Expert System, Computers in
Engineering, Vol. 1, p. 125-130,1987.
Luby, S.C. J.R. Dixon and M.K.
Simmons Designing with Features: Creating and Using a Features Data Base for
Evaluation of Manufacturability of Castings, Proceedings of the International
Computers in Engineering Conference and Exhibit, Vol. 1, published by ASME,
New York, p. 285-292, 1986.
McGregor, J. and H. Conklin - Analyzing
Manufacturability and the Effects of Design Changes, Printed Circuit Design,
Vol. 3, No. 5, p. 25-27, 1986.
Mercadante, M. - The Hewlett-Packard
Company's Approach to Design for Manufacturability, Automated Design and
Engineering for Electronics East. Proceedings of the Technical Sessions, p.
Oh, H.L. - Variation Tolerant Design, Annual Meeting of the
American Society of Mechanical Engineers, Boston, Massachusetts,
Phadke, M.S. and K. Dehnad - Optimization of Product and Process
Design for Quality and Cost, Quality and Reliability Engineering
International, Vol. 4,
p. 105-112, 1987.
Praizler, D. and G. Fritze
- A Parts Selection Expert System to Increase Manufacturability, 24th ACM/IEEE
Design Automation Conference Proceedings, New York, p. 706-12,
Priest, J.W. - Engineering Design for Producibility and
Reliability, Marcel Dekker, New York, 1988.
Priest, J.W. - State of the
Art Review and Measurement Procedures in Product Design for Manufacturing,
Proceedings of Manufacturing International, Atlanta, Georgia,
Sanchez, M. and J. Priest - Knowledge Based Producibility
Assessment System for Printed Circuit Boards, Proceedings of Manufacturing
International, Atlanta, Georgia, 1990.
Scarr, A.J. D.H. Jackson and
R.S. McMaster Product Design for Robotic and Automated Assembly, IEEE
International Conference on Robotics and Automation,
Shaw, P.J. and D. Rager - Taking Printed Circuit Boards from
Design to Production, BUSCON/87 West
Proceedings and SYSCON West, Los
Angeles, p. 295-8, 1987.
Skaggs, C.W. - Design for Electronic Assembly,
Technical Paper, Society Manufacturing Engineering, MS85-893, p.
Spitz, S.L. - Adding Manufacturability to Design Guidelines,
Electron Packaging Products Vol. 28, No. 5, p. 80-2, May, 1988.
H.W. - Design for Manufacture, Manufacturing Engineering Vol. 100, No. 1 p.
Trucks, H.E. - Designing for Economical Production,
Society of Manufacturing Engineers, Dearborn, Michigan, 1974.
and W. Cralley - Management of Uncertainty in the Product Development Process,
Proceedings of Second Conference on Design for Manufacturability, November,
Yoshimura, M. K. Itani, and K. Hitomi - Integrated Optimization
of Machine Product Design and Process Design, International Journal of
Production Research, Vol. 27, p. 1241-1256,1989.